Water dispenser 2 (i.e. hot water purifier)
Product features: 1. Instant water dispenser can easily enjoy fresh and healthy water without∏ waiting; The water temperature of the traditional water dispenser is up to 85 degr≈ees. Compared with the instant water dispenser, the water temperλature of the instant water dispenser can reach about≤ 95 degrees, which is more than 10 degrees higher than that of thβe traditional water dispenser; At the same time, compared with the traditional water ↓dispenser, his standby is close to zero power consumption, whΩich is 50% more energy-saving and power-saving than the traditional water dispenser; 2. Pλower on for standby. When the corresponding temperature is ed, the "indicator light on the corresponding temperature is on. Pres→s the handle to discharge the water with the original set tempera∏ture from the water outlet, and then press the handle to s top working; 3. When working, the flow will be accumulated and stor✘ed in the control chip. When the flow exceeds 200l, the reset light is always on, indicatin↓g that the filter element needs to be replaced.
Detail
Function Description:
1. Water temperature at the water outlet: normal temperature water, 50 ℃, 60 ℃, 85 ℃ and¥ 100 ℃;
2. Switch on / off key, long press this key to enter the controller self-test mode;
3. Press the child lock key for three seconds to e→nter the child lock state, other functions do not act, and thenΩ press this key for three seconds to return to the function state. The light is on whγen the child is locked, off when unlocking, and the buzzer rings a pr✘ompt when responding to the action;
4. When the flow exceeds 200l, the reset lamp is always on and the buzzer rings on'ce. Prompt that the filter element must be replaced. Replace the filter element anπd press and hold this key for three seconds to count theΩ flow again. When responding to the action, the buzzer☆ rings once.
Technical parameters:
1. Rated power: 2000W
2. Rated voltage: 220ac / 50Hz
3. Standby power consumption: < 0.5W
