Function Description:

1. 25 gear temperature control, VR gear ion, push independent gear;

2. Press and hold the power button for 2 seconds to start the machine, start hea↔ting, and the red LED flashes. When the temperature is stable, the ​red LED stops flashing;

3. Long press the push key, press the maximum temperature gearα to control the temperature, the green LED flashes, and the green LED sto±ps flashing when the temperature is stable;

4. Rotate VR to control the temperature corresponding to the corresponding gear>;

5. Resistance wire heating, TO-92 thyristor heat sink processing technology;

6. Judging the power supply voltage, different voltages and different driving frequencies ensu>re that the resistance wire is controlled with consβtant power;

7. In case of open circuit or short circuit in NTC, ×the heating body immediately stops heating, and the LED di✘splay is abnormal;

8. No operation after startup, automatic shutdown after 60 minutes;

9. The reserved interface can adapt to the independent tempe±rature regulation of high-grade or low-grade before the whole machine leaves the factoδry, and the proportion change of middle grade and so on.€

Technical parameters:

Applicable voltage: 100-240V / AC

Operating frequency 50 / 60Hz